CPC31320

Certificate III in Wall and Floor Tiling

Progress your career in the construction industry with this apprenticeship course. Complete your training with TAFE Queensland to become a qualified tiler and recognised tradesperson.

STUDY LOCATIONS Greater Brisbane Sunshine Coast

WAYS TO STUDY Apprenticeships and traineeships

NEXT INTAKE Starts anytime View all intakes

Course overview

Complete this apprenticeship qualification with TAFE Queensland to become a qualified wall and floor tiler. According the the Australian Government's Job Outlook service, wall and floor tilers are currently a skill in demand with employers finding it hard to fill vacancies. There's likely to be around 9,000 job openings in this occupation over the next five years with employers looking for people who are reliable, hardworking, and work well in a team.

In this course you will learn how to lay ceramic, clay, slate, marble, glass and other types of tiles on external and internal walls and floors. You'll use tiles to create protective and decorative finishes and learn how to use tile-cutting tools to cut and shape tiles needed for edges, corners, or around obstacles such as fittings and pipes. You may complete new installations or renovation work on interior or exterior surfaces of houses, shops, offices, factories as well as structures such as swimming pools and spas. Our industry-qualified teachers will ensure you can undertake tiling tasks in a safe and effective manner.

Successful completion of this qualification as part of an apprenticeship allows you to become a qualified wall and floor tiler and recognised tradesperson.

What can I do?

Wall and Floor Tiler

Course outcome:

CPC31320 Certificate III in Wall and Floor Tiling

Free apprenticeships for under 25s

The Queensland Government is providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications to support Queenslanders. Eligible qualifications have been chosen based on skills demand and advice from industry. If you’re eligible for funding, your course costs will be covered by the state government. Learn more>

Construction Skills Queensland (CSQ) Funding

TAFE Queensland is a proud recipient of Construction Skills Queensland (CSQ) funding and is a registered provider in the CSQ Skills Assessment and Gap Training program and the Registered Trade Skills Pathway program – this course is subsidised under these programs. It is important to note only eligible participants may receive funding for eligible courses. Learn more about eligibility criteria.

What you will study

The successful achievement of this qualification requires you to complete all core and 3 elective units from the list below.

UNIT CODE
UNIT NAME

UNIT CODE
CPCCCM2006

Apply basic levelling procedures

UNIT CODE :
CPCCCM2006

Unit description :
This unit of competency specifies the outcomes required to carry out levelling in a single plane for the purpose of establishing correct and accurate set-out of building components. It includes the set-up, testing and use of levelling devices, and establishing and transferring heights using a range of levelling equipment. The unit supports workers in the construction industry who use a variety of common methods and equipment when working with others and as a member of a team. It applies to levelling work on residential and commercial work sites.

Pre-requisite unit :
CPCCWHS2001 , CPCCWHS2001 , CPCCWHS2001
UNIT NAME
Apply basic levelling procedures

UNIT CODE
CPCCOM1012

Work effectively and sustainably in the construction industry

UNIT CODE :
CPCCOM1012

Unit description :
This unit of competency specifies the skills and knowledge required to work effectively and sustainably in the construction industry.
UNIT NAME
Work effectively and sustainably in the construction industry

UNIT CODE
CPCCOM1013

Plan and organise work

UNIT CODE :
CPCCOM1013

Unit description :
This unit of competency specifies the skills and knowledge required to plan and organise basic work tasks on a construction site.
UNIT NAME
Plan and organise work

UNIT CODE
CPCCOM1014

Conduct workplace communication

UNIT CODE :
CPCCOM1014

Unit description :
This unit of competency specifies the skills and knowledge required to communicate effectively with other workers in a construction workplace environment.
UNIT NAME
Conduct workplace communication

UNIT CODE
CPCCOM1015

Carry out measurements and calculations

UNIT CODE :
CPCCOM1015

Unit description :
This unit of competency specifies the skills and knowledge required to undertake basic measurements and calculations to determine task and material requirements in a construction work environment.
UNIT NAME
Carry out measurements and calculations

UNIT CODE
CPCCOM2001

Read and interpret plans and specifications

UNIT CODE :
CPCCOM2001

Unit description :
This unit of competency specifies the skills and knowledge required to read and interpret plans and specifications relevant to construction operations at a basic level.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Read and interpret plans and specifications

UNIT CODE
CPCCWF2001

Handle wall and floor tiling materials

UNIT CODE :
CPCCWF2001

Unit description :
This unit of competency specifies the skills and knowledge required to safely handle and store wall and floor tiling products and materials.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Handle wall and floor tiling materials

UNIT CODE
CPCCWF2002

Use wall and floor tiling tools and equipment

UNIT CODE :
CPCCWF2002

Unit description :
This unit of competency specifies the skills and knowledge required to safely and effectively use wall and floor tiling tools and equipment.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Use wall and floor tiling tools and equipment

UNIT CODE
CPCCWF3001

Prepare surfaces for tiling application

UNIT CODE :
CPCCWF3001

Unit description :
This unit of competency specifies the skills and knowledge required to repair and prepare different substrates for wall and floor tiling applications.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Prepare surfaces for tiling application

UNIT CODE
CPCCWF3002

Install floor tiles

UNIT CODE :
CPCCWF3002

Unit description :
This unit of competency specifies the skills and knowledge required to install floor tiles to different substrates.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Install floor tiles

UNIT CODE
CPCCWF3003

Install wall tiles

UNIT CODE :
CPCCWF3003

Unit description :
This unit of competency specifies the skills and knowledge required to use adhesive to install wall tiles to differing substrates.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Install wall tiles

UNIT CODE
CPCCWF3004

Repair wall and floor tiling

UNIT CODE :
CPCCWF3004

Unit description :
This unit of competency specifies the skills and knowledge required to repair tiling by replacing wall and floor tiles.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Repair wall and floor tiling

UNIT CODE
CPCCWF3005

Install decorative tiling

UNIT CODE :
CPCCWF3005

Unit description :
This unit of competency specifies the skills and knowledge required to locate and set out dimensions and plans for decorative tiling projects to form specific patterns.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Install decorative tiling

UNIT CODE
CPCCWF3006

Install mosaic tiling

UNIT CODE :
CPCCWF3006

Unit description :
This unit of competency specifies the skills and knowledge required to install mosaic tiles to wall and floors.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Install mosaic tiling

UNIT CODE
CPCCWF3007

Tile curved surfaces

UNIT CODE :
CPCCWF3007

Unit description :
This unit of competency specifies the skills and knowledge required to tile curved surfaces.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Tile curved surfaces

UNIT CODE
CPCCWF3009

Apply waterproofing for wall and floor tiling

UNIT CODE :
CPCCWF3009

Unit description :
This unit specifies the skills and knowledge required to apply waterproofing to internal and external wet areas ready for tiling.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Apply waterproofing for wall and floor tiling

UNIT CODE
CPCCWHS2001

Apply WHS requirements, policies and procedures in the construction industry

UNIT CODE :
CPCCWHS2001

Unit description :
This unit specifies the outcomes required to carry out work health and safety (WHS) requirements through safe work practices in all on- or off-site construction workplaces.
UNIT NAME
Apply WHS requirements, policies and procedures in the construction industry

UNIT CODE
UNIT NAME

Sunshine Coast

Sunshine Coast

UNIT CODE
CPCCCM2009

Carry out basic demolition

UNIT CODE :
CPCCCM2009

Unit description :
This unit of competency specifies the skills and knowledge required remove components from single storey buildings and structures using basic demolition techniques.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Carry out basic demolition

UNIT CODE
CPCCPB3004

Fix wet area sheets

UNIT CODE :
CPCCPB3004

Unit description :
This unit of competency specifies the skills and knowledge required to fix wet area sheets to comply with manufacturer and job specifications.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Fix wet area sheets

UNIT CODE
CPCCWF3008

Tile pools and spas

UNIT CODE :
CPCCWF3008

Unit description :
This unit of competency specifies the skills and knowledge required to tile a pool or spa.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Tile pools and spas

UNIT CODE
CPCCWP3002

Apply waterproofing process to internal wet areas

UNIT CODE :
CPCCWP3002

Unit description :
This unit specifies the skills and knowledge required to apply waterproofing to internal wet areas, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Apply waterproofing process to internal wet areas

Greater Brisbane

Greater Brisbane

UNIT CODE
CPCCCM2009

Carry out basic demolition

UNIT CODE :
CPCCCM2009

Unit description :
This unit of competency specifies the skills and knowledge required remove components from single storey buildings and structures using basic demolition techniques.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Carry out basic demolition

UNIT CODE
CPCCCO2013

Carry out concreting to simple forms

UNIT CODE :
CPCCCO2013

Unit description :
This unit of competency specifies the skills and knowledge required to safely install formwork, reinforcement and place and finish concrete for the construction of minor slabs, pathways and other minor works to a specified design finish, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Carry out concreting to simple forms

UNIT CODE
CPCCPB3004

Fix wet area sheets

UNIT CODE :
CPCCPB3004

Unit description :
This unit of competency specifies the skills and knowledge required to fix wet area sheets to comply with manufacturer and job specifications.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Fix wet area sheets

UNIT CODE
CPCCWF3008

Tile pools and spas

UNIT CODE :
CPCCWF3008

Unit description :
This unit of competency specifies the skills and knowledge required to tile a pool or spa.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Tile pools and spas

UNIT CODE
CPCCWP3002

Apply waterproofing process to internal wet areas

UNIT CODE :
CPCCWP3002

Unit description :
This unit specifies the skills and knowledge required to apply waterproofing to internal wet areas, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation.

Pre-requisite unit :
CPCCWHS2001
UNIT NAME
Apply waterproofing process to internal wet areas

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Acacia Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Nambour	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, online or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

Download Brochure

Certificate III in Wall and Floor Tiling (CPC31320)

Ask a question

Certificate III in Wall and Floor Tiling

COURSE CODE: CPC31320

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

Entry requirements

There are no formal entry requirements for this course.

Selection criteria

To study an apprenticeship program you must be indentured as an apprentice with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Find out more on how to become an apprentice or trainee

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of prior learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses

Certificate III in Wall and Ceiling Lining

Complete this qualification with TAFE Queensland as part of your apprenticeship to progress your construction career. Become a qualified plasterer and recognised tradesperson.

Careers

Fibrous Plasterer

Certificate III in Construction Waterproofing

Become a qualified waterproofer with this hands-on qualification. This course provides the practical skills required to undertake a range of waterproofing tasks in the commercial or residential construction industry.

Careers

Waterproofer
Construction Waterproofer

Certificate IV in Building and Construction

Take your building business to the next level by completing this qualification with TAFE Queensland. This course is perfect for builders or owners of small to medium-sized building businesses.

Careers

Builder
Construction Supervisor
Construction Managers
Site Manager
Site Supervisor

Part Time : 1 year

Next Start : 28 Jan 2025

😊 Personalise my view

I am

interested in studying

interested in studying

currently studying

interested in studying

interested in

interested in

interested in

interested in studying

at

Campus

Campus

Campus

Campus

Campus

Campus

Campus

Certificate III in Wall and Floor Tiling

Course overview

What can I do?

Course outcome:

Free apprenticeships for under 25s

Construction Skills Queensland (CSQ) Funding

Core units

Elective units

Download Brochure

Ask a question

Certificate III in Wall and Floor Tiling

Payment Options

How can I pay for this course?

Payment plan

Upfront payment

Entry requirements

Selection criteria

Assessment methods

Pathways

University pathways

How to apply

Direct application

Course disclaimer

Recognition of prior learning (RPL) and credit transfers

Related courses

Certificate III in Wall and Ceiling Lining

Careers

Certificate III in Construction Waterproofing

Careers

Certificate IV in Building and Construction

Careers