AUR31520

Certificate III in Automotive Diesel Engine Technology

Embark upon a dynamic career in the automotive industry with this hands on qualification. This course will give you the practical skills required to work as a qualified diesel engine technician.

STUDY LOCATIONS Greater Brisbane Gold Coast

WAYS TO STUDY Apprenticeships and traineeships

NEXT INTAKE Starts anytime View all intakes

Course overview

Embark upon a dynamic career in the automotive industry with this hands on qualification. This course will give you the practical skills required to work as a qualified diesel engine technician.

According to the Australian Government's Job Outlook service, demand for qualified mechanics (including diesel mechanics) grew strongly over the past five years with employers finding it hard to fill vacancies. Job openings are expected to remain steady in the near future with around 23,000 job openings expected over the next five years.

This course will give you the practical skills required to perform mechanical work on diesel engines, fuel systems, and electrical systems in the automotive service and repair sector. You will also learn how to diagnose faults using specialised testing equipment for service and repair.

Successful completion of this course will give you the knowledge and practical skills required to work as a diesel engine specialist. If completed as part of an apprenticeship this course will also allow you to apply for a trade qualification.

What can I do?

Diesel Engine Specialist
Diesel Engine Technician

Course outcome:

AUR31520 Certificate III in Automotive Diesel Engine Technology

Trade skills assessment and gap training program

If you can demonstrate substantial competency in this qualification, you may be able to access funding for recognition of prior learning and gap training through the Trade Skills and Assessment Gap Training (TSAGT) program. TAFE Queensland is a proud recipient of funding from the Queensland Government, Department of Employment, Small Business and Training (DESBT) for this program. Only eligible participants may receive funding for eligible courses. Learn more about eligibility criteria.

Free apprenticeships for under 25s

The Queensland government is supporting young Queenslanders up to the age of 25 by providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications. Learn more>

What you will study

The successful achievement of this qualification requires you to complete all core and 14 elective units from the list below.

UNIT CODE
UNIT NAME

UNIT CODE
AURAEA002

Follow environmental and sustainability best practice in an automotive workplace

UNIT CODE :
AURAEA002

Unit description :
This unit describes the performance outcomes required to follow environmental and sustainability best practices, including complying with established workplace procedures and environmental regulations as well as following sustainability practices that may reduce the environmental impact of work practices and outputs. It applies to those working in the automotive industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Follow environmental and sustainability best practice in an automotive workplace

UNIT CODE
AURASA102

Follow safe working practices in an automotive workplace

UNIT CODE :
AURASA102

Unit description :
This unit describes the skills and knowledge required to identify and follow safety and emergency procedures in an automotive workplace.
UNIT NAME
Follow safe working practices in an automotive workplace

UNIT CODE
AURETR112

Test and repair basic electrical circuits

UNIT CODE :
AURETR112

Unit description :
This unit describes the skills and knowledge required to inspect, test and repair basic electrical circuits in vehicle and machinery electrical systems.
UNIT NAME
Test and repair basic electrical circuits

UNIT CODE
AURETR125

Test, charge and replace batteries and jump-start vehicles

UNIT CODE :
AURETR125

Unit description :
This unit describes the skills and knowledge required to test, charge, replace, retest and secure a range of automotive batteries, including vehicle or machinery jump-starting procedures.
UNIT NAME
Test, charge and replace batteries and jump-start vehicles

UNIT CODE
AURHTE102

Diagnose and repair heavy vehicle compression ignition engines

UNIT CODE :
AURHTE102

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the compression ignition engines of heavy vehicles.
UNIT NAME
Diagnose and repair heavy vehicle compression ignition engines

UNIT CODE
AURHTF102

Diagnose and repair heavy vehicle diesel fuel injection systems

UNIT CODE :
AURHTF102

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the diesel fuel injection systems of heavy vehicles and machinery.
UNIT NAME
Diagnose and repair heavy vehicle diesel fuel injection systems

UNIT CODE
AURTTA104

Carry out servicing operations

UNIT CODE :
AURTTA104

Unit description :
This unit describes the skills and knowledge required to carry out servicing operations.
UNIT NAME
Carry out servicing operations

UNIT CODE
AURTTA118

Develop and carry out diagnostic test strategies

UNIT CODE :
AURTTA118

Unit description :
This unit describes the skills and knowledge required to develop and carry out a diagnostic testing strategy on vehicles, vessels or machinery.
UNIT NAME
Develop and carry out diagnostic test strategies

UNIT CODE
AURTTE104

Inspect and service engines

UNIT CODE :
AURTTE104

Unit description :
This unit describes the skills and knowledge required to inspect and service engines.
UNIT NAME
Inspect and service engines

UNIT CODE
AURTTK001

Use and maintain measuring equipment in an automotive workplace

UNIT CODE :
AURTTK001

Unit description :
This unit describes the performance outcomes required to select, use, maintain and store automotive measuring equipment. It involves selecting and maintaining measuring equipment, and using measuring equipment to determine length, width, angles, ovality, depth, out of square, clearances, run-out, pressure and temperature of automotive components and materials. It applies to those working in all sectors of the automotive industry. This unit does not apply to electrical measuring equipment that measures voltage, resistance or current flow. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Use and maintain measuring equipment in an automotive workplace

UNIT CODE
AURTTK102

Use and maintain tools and equipment in an automotive workplace

UNIT CODE :
AURTTK102

Unit description :
This unit describes the skills and knowledge required to select, use, maintain and store tools and equipment in an automotive workplace.
UNIT NAME
Use and maintain tools and equipment in an automotive workplace

UNIT CODE
AURTTM004

Assemble engine blocks and sub-assemblies

UNIT CODE :
AURTTM004

Unit description :
This unit describes the performance outcomes required to assemble a short engine block and sub-assemblies, and check clearances and tolerances in an engine reconditioning process. It involves preparing for the task, selecting the correct assembly procedure, carrying out the assembly and performing post-assembly testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engine blocks and sub-assemblies include those in vehicles from all sectors of the industry. This unit does not cover fitting semi-finished sleeves, or boring and honing cylinders. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Assemble engine blocks and sub-assemblies

UNIT CODE
AURTTM008

Dismantle and evaluate engine blocks and sub-assemblies

UNIT CODE :
AURTTM008

Unit description :
This unit describes the performance outcomes required to dismantle and evaluate an engine block and its sub-assemblies as part of an engine repair or reconditioning process. It involves preparing for the task, dismantling and evaluating the engine blocks and sub-assemblies, determining required repair action, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engine blocks and sub-assemblies include those in vehicles from all sectors of the industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Dismantle and evaluate engine blocks and sub-assemblies

UNIT CODE
AURTTM011

Recondition engine cylinder heads

UNIT CODE :
AURTTM011

Unit description :
This unit describes the performance outcomes required to recondition engine cylinder heads as part of an engine reconditioning process.
UNIT NAME
Recondition engine cylinder heads

UNIT CODE
UNIT NAME

Greater Brisbane (Automotive)

Greater Brisbane (Automotive)

UNIT CODE
AURAFA103

Communicate effectively in an automotive workplace

UNIT CODE :
AURAFA103

Unit description :
This unit describes the skills and knowledge required to communicate in an automotive workplace. It involves communicating effectively by conveying and receiving information using verbal and non-verbal techniques and correct automotive technical terminology.
UNIT NAME
Communicate effectively in an automotive workplace

UNIT CODE
AURETR124

Diagnose and repair compression ignition engine management systems

UNIT CODE :
AURETR124

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the compression ignition engine management systems of vehicles, vessels or machinery.
UNIT NAME
Diagnose and repair compression ignition engine management systems

UNIT CODE
AURETR129

Diagnose and repair charging systems

UNIT CODE :
AURETR129

Unit description :
This unit describes the skills and knowledge required to diagnose and repair charging systems. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair charging systems

UNIT CODE
AURETR130

Diagnose and repair starting systems

UNIT CODE :
AURETR130

Unit description :
This unit describes the skills and knowledge required to diagnose and repair starting systems. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair starting systems

UNIT CODE
AURETR132

Diagnose and repair automotive electrical systems

UNIT CODE :
AURETR132

Unit description :
This unit describes the skills and knowledge required to diagnose and repair automotive electrical systems. The systems used vary based on the work context
UNIT NAME
Diagnose and repair automotive electrical systems

UNIT CODE
AURHTX104

Diagnose and repair heavy vehicle clutch systems

UNIT CODE :
AURHTX104

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the clutch systems of heavy vehicles.
UNIT NAME
Diagnose and repair heavy vehicle clutch systems

UNIT CODE
AURHTZ101

Diagnose and repair heavy vehicle emission control systems

UNIT CODE :
AURHTZ101

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the emission control systems of heavy vehicles.
UNIT NAME
Diagnose and repair heavy vehicle emission control systems

UNIT CODE
AURMTE101

Test engines using a dynamometer

UNIT CODE :
AURMTE101

Unit description :
This unit describes the skills and knowledge required to test engines using a dynamometer. The engines being tested may be in a vehicle or stand alone.
UNIT NAME
Test engines using a dynamometer

UNIT CODE
AURTTA105

Select and use bearings, seals, gaskets, sealants and adhesives

UNIT CODE :
AURTTA105

Unit description :
This unit describes the skills and knowledge required to select and use bearings, seals, gaskets, sealants and adhesives in the automotive vehicle industry.
UNIT NAME
Select and use bearings, seals, gaskets, sealants and adhesives

UNIT CODE
AURTTC103

Diagnose and repair cooling systems

UNIT CODE :
AURTTC103

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the cooling systems of vehicles. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair cooling systems

UNIT CODE
AURTTF102

Inspect and service diesel fuel injection systems

UNIT CODE :
AURTTF102

Unit description :
This unit describes the skills and knowledge required to inspect and service diesel fuel injection systems.
UNIT NAME
Inspect and service diesel fuel injection systems

UNIT CODE
AURTTF105

Diagnose and repair engine forced-induction systems

UNIT CODE :
AURTTF105

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in engine forced-induction systems.
UNIT NAME
Diagnose and repair engine forced-induction systems

UNIT CODE
AURVTW018

Carry out oxyacetylene welding, thermal heating and cutting

UNIT CODE :
AURVTW018

Unit description :
This unit describes the skills and knowledge required to carry out basic welding, thermal heating and cutting operations.
UNIT NAME
Carry out oxyacetylene welding, thermal heating and cutting

UNIT CODE
AURVTW109

Carry out basic gas metal arc welding

UNIT CODE :
AURVTW109

Unit description :
This unit describes the skills and knowledge required to prepare and weld components using the gas metal arc welding (GMAW) process.
UNIT NAME
Carry out basic gas metal arc welding

Gold Coast - Common Electives ( Automotive / Marine)

Gold Coast - Common Electives ( Automotive / Marine)

UNIT CODE
AURAFA103

Communicate effectively in an automotive workplace

UNIT CODE :
AURAFA103

Unit description :
This unit describes the skills and knowledge required to communicate in an automotive workplace. It involves communicating effectively by conveying and receiving information using verbal and non-verbal techniques and correct automotive technical terminology.
UNIT NAME
Communicate effectively in an automotive workplace

UNIT CODE
AURETR124

Diagnose and repair compression ignition engine management systems

UNIT CODE :
AURETR124

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the compression ignition engine management systems of vehicles, vessels or machinery.
UNIT NAME
Diagnose and repair compression ignition engine management systems

UNIT CODE
AURETR128

Diagnose and repair instruments and warning systems

UNIT CODE :
AURETR128

Unit description :
This unit describes the skills and knowledge required to diagnose and repair instruments and warning systems. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair instruments and warning systems

UNIT CODE
AURETR129

Diagnose and repair charging systems

UNIT CODE :
AURETR129

Unit description :
This unit describes the skills and knowledge required to diagnose and repair charging systems. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair charging systems

UNIT CODE
AURETR130

Diagnose and repair starting systems

UNIT CODE :
AURETR130

Unit description :
This unit describes the skills and knowledge required to diagnose and repair starting systems. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair starting systems

UNIT CODE
AURETR132

Diagnose and repair automotive electrical systems

UNIT CODE :
AURETR132

Unit description :
This unit describes the skills and knowledge required to diagnose and repair automotive electrical systems. The systems used vary based on the work context
UNIT NAME
Diagnose and repair automotive electrical systems

UNIT CODE
AURHTZ101

Diagnose and repair heavy vehicle emission control systems

UNIT CODE :
AURHTZ101

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the emission control systems of heavy vehicles.
UNIT NAME
Diagnose and repair heavy vehicle emission control systems

UNIT CODE
AURTTA006

Inspect and service hydraulic systems

UNIT CODE :
AURTTA006

Unit description :
This unit describes the performance outcomes required to inspect and service hydraulic systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The hydraulic systems include those of agricultural machinery, heavy commercial vehicles, marine vessels, mobile plant machinery or outdoor power equipment. This unit is not intended for drive systems, power steering or hydraulic braking systems. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect and service hydraulic systems

UNIT CODE
AURTTA105

Select and use bearings, seals, gaskets, sealants and adhesives

UNIT CODE :
AURTTA105

Unit description :
This unit describes the skills and knowledge required to select and use bearings, seals, gaskets, sealants and adhesives in the automotive vehicle industry.
UNIT NAME
Select and use bearings, seals, gaskets, sealants and adhesives

UNIT CODE
AURTTC001

Inspect and service cooling systems

UNIT CODE :
AURTTC001

Unit description :
This unit describes the performance outcomes required to inspect and service air and liquid cooling systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, reporting the inspection findings, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The cooling systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycle or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect and service cooling systems

UNIT CODE
AURTTC103

Diagnose and repair cooling systems

UNIT CODE :
AURTTC103

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the cooling systems of vehicles. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair cooling systems

UNIT CODE
AURTTF102

Inspect and service diesel fuel injection systems

UNIT CODE :
AURTTF102

Unit description :
This unit describes the skills and knowledge required to inspect and service diesel fuel injection systems.
UNIT NAME
Inspect and service diesel fuel injection systems

UNIT CODE
AURTTF105

Diagnose and repair engine forced-induction systems

UNIT CODE :
AURTTF105

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in engine forced-induction systems.
UNIT NAME
Diagnose and repair engine forced-induction systems

Gold Coast - Automotive

Gold Coast - Automotive

UNIT CODE
AURHTX104

Diagnose and repair heavy vehicle clutch systems

UNIT CODE :
AURHTX104

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the clutch systems of heavy vehicles.
UNIT NAME
Diagnose and repair heavy vehicle clutch systems

Gold Coast - Marine

Gold Coast - Marine

UNIT CODE
AURRTX002

Inspect and service marine inboard transmissions

UNIT CODE :
AURRTX002

Unit description :
This unit describes the performance outcomes required to inspect and service marine inboard transmissions. It involves preparing for the task, inspecting the transmission, reporting the inspection findings, servicing and adjusting the transmission, and completing workplace processes and documentation. It applies to those working in the marine service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
UNIT NAME
Inspect and service marine inboard transmissions

UNIT CODE
AURTTZ102

Diagnose and repair exhaust systems

UNIT CODE :
AURTTZ102

Unit description :
This unit describes the skills and knowledge required to diagnose and repair faults in the exhaust systems of vehicles. The systems used vary based on the work context.
UNIT NAME
Diagnose and repair exhaust systems

UNIT CODE
AURVTW109

Carry out basic gas metal arc welding

UNIT CODE :
AURVTW109

Unit description :
This unit describes the skills and knowledge required to prepare and weld components using the gas metal arc welding (GMAW) process.
UNIT NAME
Carry out basic gas metal arc welding

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Acacia Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Ashmore	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Ashmore	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, online or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

Download Brochure

Certificate III in Automotive Diesel Engine Technology (AUR31520)

Ask a question

Certificate III in Automotive Diesel Engine Technology

COURSE CODE: AUR31520

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

Entry requirements

There are no formal entry requirements for this course.

Selection criteria

To study an apprenticeship program you must be indentured as an apprentice with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Find out more on how to become an apprentice or trainee

Resources required

You are responsible for meeting the minimum occupational health and safety requirements in practical classes.
This includes the use of:

clear safety glasses to AS 1336 or 1337
protective footwear with safety toe cap and non-slip soles to AS2210
mechanic gloves
ear plugs or muffs
You should also wear 100% cotton drill industry-standard protective clothing

If you fail to meet these minimum standards of dress, you will not be permitted entry into practical classes.

You will be provided with a recommended reading list and/or required textbooks after enrolment, during orientation or at the start of each unit. The purchase of these resources may incur additional costs, or you may be able to borrow them from the TAFE Queensland library network.

You are also required to have access to and bring personal stationary, a USB, and a calculator.

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of prior learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses

Certificate III in Heavy Commercial Vehicle Mechanical Technology

This course will qualify you to become a heavy vehicle mechanical technician working on trucks, buses, earthmoving equipment or agricultural machinery.

Careers

Diesel Motor Mechanic
Heavy Commercial Vehicle Technician
Heavy Vehicle Mechanic

Full Time : 2 years

Next Start : 28 Jan 2025

😊 Personalise my view

I am

interested in studying

interested in studying

currently studying

interested in studying

interested in

interested in

interested in

interested in studying

at

Campus

Campus

Campus

Campus

Campus

Campus

Campus

Certificate III in Automotive Diesel Engine Technology

Course overview

What can I do?

Course outcome:

Trade skills assessment and gap training program

Free apprenticeships for under 25s

Core units

Elective units

Download Brochure

Ask a question

Certificate III in Automotive Diesel Engine Technology

Payment Options

How can I pay for this course?

Payment plan

Upfront payment

Entry requirements

Selection criteria

Resources required

Assessment methods

Pathways

University pathways

How to apply

Direct application

Course disclaimer

Recognition of prior learning (RPL) and credit transfers

Related courses

Certificate III in Heavy Commercial Vehicle Mechanical Technology

Careers